Wire weaving patterns free.

Basic Wire weaving patterns free. Wire weaving patterns.

Table of Contents

Wire wrapping is a special jewelry making technique that involves either covering pendants with intricate wire patterns or creating these patterns with wire alone. So, if you are reading this article, you may be looking for wire weaving patterns free.

Using wire, we can weave beads, gems and stones. Thus you can beautifully create an unusual jewelry design that can be worn with any of your dresses.
To get started, all you need is some wire of any color and some tools – pliers, round pliers and wire cutters.

Discover Basic weaves to use with one, two, three and four… wire frames.

Once you know how to make the basic weavings, you can do a lot with the wire. It’s very easy when you know how to do it.

Tension is one of the most important things in weaving. If it is too tight then the shape of the whole frame may be damaged, but if you make it too loose, the weaving will be uneven. So when working with wire weaving patterns free, always pay attention to the tightness of the weaving.

Don’t forget to constantly tighten your wire wraps while working. But keep in mind that if you wait too long and try to tighten the whole weaving too late – it will be very difficult to change anything. That’s why you need to be always careful. Be sure to always check your weaving and tighten everything up after every 2-3 wraps.

I use pliers with hard silicone tips (these pliers have red tips in the photo). They help me to hold the wire while weaving. The pliers with yellow tips have soft tips. And these tips are replaceable. I bought several pairs of silicone tips for replacement.

Be careful when you have finally finished your weaving. Just trim the weaving wire at the back of the piece. Then secure the wire by pressing firmly against a frame wire. For that, you can use flat nose pliers.

Avoid kinks in your weaving wire. If you notice them, just catch them before they form. Just untwist the wire before it is pulled too tight. When it is pulled very tight, it will be difficult to change anything.

Weaving techniques.

As a rule, a thin wire is used to weave a few basic wires. You can weave in different ways. I’ll draw it for you, so it will be clearer. When you understand weaving techniques it will be easier to understand wire weaving patterns free to you.

I weave from left to right, weaving the main wires from bottom to top.

You can weave from left to right – top to bottom

But what if the person is left-handed? Then you can weave from right to left, from bottom to top.

Or (if you are left-handed) from right to left, from top to bottom.

It is best to use one basic, the most convenient technique for you, but if necessary you should know how to weave in other techniques. Sometimes in the work, you will need to weave in reverse.

What to do if I ran out of thin wire?

Everything is very simple. Take more thin wire and continue weaving as shown in the video.

How do I neatly bend wire weavings?

I usually bend the weavings by hand. You can use pliers with soft silicone tips. I have purchased many different tools during the time I have been working with the wire. I bought pliers with tips from different manufacturers. The tips turned out to be different in hardness. If you like using different wire weaving patterns free, replaceable tips will come in handy for you.

Now I use different hardness tips for different types of wire work.

If you are bending a weaving around a cabochon or bead, you can use a homemade tool.